Epson T24 Waste Ink Counter Reset

Epson T24 Waste Ink Counter Reset

When the Epson T24 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson T24 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson T24 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson T24 waste counter reset in minutes.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson T24 Ink Pad Counter Reset – Quick Steps

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson T24 directly. Keep Internet enabled for validation.
  2. Passo 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson T24.
  3. Etapa 3: Use the key to reset the counter, wait for completion, then restart Epson T24 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson T24 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson T24 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras