Epson RX560 Waste Ink Counter Reset

Epson RX560 Waste Ink Counter Reset

The Epson RX560 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson RX560 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson RX560 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson RX560 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson RX560 Ink Pad Counter Reset – Quick Steps

  1. Passo 1: Use a Windows PC (7–11) with Internet access. Connect Epson RX560 via USB (Wi-Fi reset is not supported).
  2. Passo 2: Start Wic Reset Connect in Administrator mode and wait until Epson RX560 appears in the device list.
  3. Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson RX560.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson RX560 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson RX560 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras