Epson RX560 Waste Ink Counter Reset

The Epson RX560 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson RX560 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson RX560 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson RX560 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Kako se pogreška prikazuje

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Epson RX560 Ink Pad Counter Reset – Quick Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson RX560 via USB (Wi-Fi reset is not supported).
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson RX560 appears in the device list.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson RX560.

Most Epson RX560 waste counter resets finish in ~1–2 minutes.

Uobičajena rješenja

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Pokrenite aplikaciju kao administrator.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).

Često postavljana pitanja