Epson ME-600F Ink Pad Counter Reset Guide

Epson ME-600F Waste Ink Counter Reset

The Epson ME-600F is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-600F uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ME-600F Show ‘Service Required’?

Most Epson ME-600F waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson ME-600F Printing

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson ME-600F directly. Keep Internet enabled for validation.
  2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson ME-600F is detected.
  3. Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson ME-600F.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson ME-600F waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson ME-600F – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras