Reset Epson L455 Waste Ink Counter in Minutes

Epson L455 Waste Ink Counter Reset

The Epson L455 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson L455 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson L455 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L455 waste counter reset in minutes.

Reset Epson L455 Waste Ink Counter in 3 Steps

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson L455 directly. Keep Internet enabled for validation.
  2. Passo 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L455.
  3. Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson L455.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson L455 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson L455 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras