Model-specific reset guide

Epson L1119 Reset Waste Ink Counter

When Epson L1119 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Tecla de reinicialização$8,00
Instant email deliverySuporte técnico incluídoReplacement key after a failed reset
The problem

Why the ink pad counter blocks Epson L1119

Every cleaning cycle sends a small amount of ink to the waste ink system. Epson L1119 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.

Wic Reset Connect is designed to reset the compatible counter in Epson L1119. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Tecla de reinicializaçãoFor this operation
Step by step

Reset the counter in Epson L1119

Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.

  1. Install the original driver

    Install the official Epson driver for L1119 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L1119 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L1119.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: After the program confirms completion, close it, turn Epson L1119 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson L1119 is not detected
  • Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Install the original Epson driver for L1119; a generic Windows driver may not expose the required communication interface.
  • Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.

Open full instructions

Common questions

Epson L1119 reset FAQ

Does the reset clean or replace the ink pads?

No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.

What if the first reset attempt fails?

Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.

Can I reset Epson L1119 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

Reset with confidence

Restore Epson L1119

Prepare Epson L1119, purchase a reset key and return to printing without an unnecessary service visit.

Reset key: $8,00
Shopping Cart
Selecione a sua moeda