How to Reset Epson EP-706A Waste Ink Counter

Epson EP-706A Waste Ink Counter Reset

The Epson EP-706A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson EP-706A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson EP-706A Ink Pad Counter Warning?

Most Epson EP-706A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Three Steps to Restore Epson EP-706A Printing

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson EP-706A directly. Keep Internet enabled for validation.
  2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson EP-706A is detected.
  3. Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-706A.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson EP-706A waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).
  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson EP-706A – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras