Model-specific reset guide
Mengatur Ulang Penghitung Tinta Limbah pada Epson EP-706A
If your Epson EP-706A has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Understanding the Epson EP-706A waste ink warning
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson EP-706A estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson EP-706A. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EP-706A
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for EP-706A and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EP-706A to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-706A.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EP-706A is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for EP-706A; a generic Windows driver may not expose the required communication interface.
Epson EP-706A reset FAQ
Does Epson EP-706A need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Can I reset Epson EP-706A over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson EP-706A
Complete the Epson EP-706A counter reset with Wic Reset Connect and assistance whenever you need it.