Model-specific reset guide
Epson D92 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson D92 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Before resetting Epson D92
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson D92, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson D92. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson D92
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for D92 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson D92 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson D92.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson D92 is not detected
- Install the original Epson driver for D92; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson D92 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson D92
A direct USB connection, the correct driver and a valid key are all you need to reset Epson D92.