Model-specific reset guide
Epson XP-335 Reset Waste Ink Counter
Epson XP-335 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why Epson XP-335 stops printing
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson XP-335 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-335. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-335
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for XP-335 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-335 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-335.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-335 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for XP-335; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson XP-335 reset FAQ
Can I reset Epson XP-335 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson XP-335
Follow the verified sequence for Epson XP-335, then restart the printer and continue your work.