Fix Epson XP-240 Service Required – Waste Counter Reset

Epson XP-240 Waste Ink Counter Reset

When the Epson XP-240 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-240 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-240 Waste Ink Counter

Most Epson XP-240 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Epson XP-240 Ink Pad Counter Reset – Quick Steps

  1. Krok 1: Connect Epson XP-240 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-240 appears in the device list.
  3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson XP-240 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukcje

Most Epson XP-240 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

If the Printer Is Not Detected

  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-240 – Waste Ink Counter Reset using Wic Reset Connect.

Koszyk