Model-specific reset guide
Epson TX620FWD – zresetowanie licznika zużytego atramentu
The service-required message on Epson TX620FWD often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Understanding the Epson TX620FWD waste ink warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson TX620FWD tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson TX620FWD. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX620FWD
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for TX620FWD and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX620FWD to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX620FWD.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX620FWD is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson TX620FWD reset FAQ
Can I reset Epson TX620FWD over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson TX620FWD need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson TX620FWD
A direct USB connection, the correct driver and a valid key are all you need to reset Epson TX620FWD.