How to Reset Epson ME-900WD Waste Ink Counter

Epson ME-900WD Waste Ink Counter Reset

If your Epson ME-900WD suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson ME-900WD tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson ME-900WD Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson ME-900WD waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson ME-900WD Ink Pad Counter Reset – Quick Steps

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson ME-900WD directly. Keep Internet enabled for validation.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson ME-900WD appears in the device list.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson ME-900WD.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukcje

Most Epson ME-900WD waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ME-900WD – Waste Ink Counter Reset using Wic Reset Connect.

Koszyk