Model-specific reset guide
Epson ME-900WD Reset Waste Ink Counter
Epson ME-900WD records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Before resetting Epson ME-900WD
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson ME-900WD, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson ME-900WD. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ME-900WD
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for ME-900WD and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ME-900WD to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ME-900WD.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ME-900WD is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for ME-900WD; a generic Windows driver may not expose the required communication interface.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson ME-900WD reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson ME-900WD need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson ME-900WD
A direct USB connection, the correct driver and a valid key are all you need to reset Epson ME-900WD.