How to Reset Epson DX9400F Waste Ink Counter

Epson DX9400F Waste Ink Counter Reset

If your Epson DX9400F suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson DX9400F tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson DX9400F Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson DX9400F waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson DX9400F Waste Counter Reset

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson DX9400F directly. Keep Internet enabled for validation.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson DX9400F is detected.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson DX9400F.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukcje

Most Epson DX9400F waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson DX9400F – Waste Ink Counter Reset using Wic Reset Connect.

Koszyk