特定型号重置指南
Epson DX9400F Reset Waste Ink Counter
The service-required message on Epson DX9400F often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Understanding the Epson DX9400F waste ink warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson DX9400F tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson DX9400F. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson DX9400F
重置通常只需几分钟，但在使用密钥之前，必须正确检测到打印机。.
-
安装原始驱动程序
Install the official Epson driver for DX9400F and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson DX9400F to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson DX9400F.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson DX9400F is not detected
- Install the original Epson driver for DX9400F; a generic Windows driver may not expose the required communication interface.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson DX9400F reset FAQ
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
Can I reset Epson DX9400F over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.