Model-specific reset guide
Epson XP-400 afvalinktteller resetten
A waste ink counter warning can prevent Epson XP-400 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
The counter behind the Epson XP-400 warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson XP-400 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-400. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-400
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for XP-400 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-400 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-400.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-400 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for XP-400; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson XP-400 reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson XP-400 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson XP-400
Complete the Epson XP-400 counter reset with Wic Reset Connect and assistance whenever you need it.