Epson WF-3622 Waste Ink Counter Reset

Epson WF-3622 Waste Ink Counter Reset

When the Epson WF-3622 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-3622 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WF-3622 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson WF-3622 waste counter reset in minutes.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson WF-3622 Waste Counter Reset

  1. Stap 1: Prepare a Windows PC + USB cable and connect Epson WF-3622 directly. Keep Internet enabled for validation.
  2. Stap 2: Start Wic Reset Connect in Administrator mode and wait until Epson WF-3622 appears in the device list.
  3. Stap 3: Use the key to reset the counter, wait for completion, then restart Epson WF-3622 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructies

Most Epson WF-3622 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson WF-3622 – Waste Ink Counter Reset using Wic Reset Connect.

Winkelwagen