Epson WF-3622 Waste Ink Counter Reset
When the Epson WF-3622 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-3622 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why Does the Epson WF-3622 Show ‘Service Required’?
Una visita di assistenza spesso non è necessaria. Wic Reset Connect allows a safe Epson WF-3622 waste counter reset in minutes.
Come appare l'errore
- La stampante si rifiuta di stampare anche se l'inchiostro è disponibile
- Il monitor di stato Epson mostra un avviso di manutenzione
- Spie lampeggianti e lavori bloccati
- Il dispositivo è bloccato finché non viene eseguito il reset
Step-by-Step: Epson WF-3622 Waste Counter Reset
- Fase 1: Prepare a Windows PC + USB cable and connect Epson WF-3622 directly. Keep Internet enabled for validation.
- Fase 2: Inizio Wic Reset Connect in Administrator mode and wait until Epson WF-3622 appears in the device list.
- Fase 3: Use the key to reset the counter, wait for completion, then restart Epson WF-3622 to finalize.
Most Epson WF-3622 waste counter resets finish in ~1–2 minutes.
Prima di iniziare
- È necessaria la connessione USB (il reset Wi-Fi non è supportato)
- PC Windows 7/8/10/11
- Connessione Internet stabile durante il reset
- Wic Reset valido Chiave di reset Connect
Domande frequenti
Ho bisogno di un centro di assistenza?
In genere non per il blocco del contatore dell'inchiostro di scarto; di solito è sufficiente un reset.
E se il reset non funziona?
Controllare il cavo/la porta USB, eseguire come amministratore e chiudere le altre utility della stampante.
Quanto tempo ci vuole?
Di solito circa 1-2 minuti.
È possibile eseguire il reset tramite Wi-Fi?
No. Il reset richiede una connessione USB a un PC Windows.
Guide prepared for Epson WF-3622 – Waste Ink Counter Reset using Wic Reset Connect.