Epson WF-3622 Waste Ink Counter Reset

When the Epson WF-3622 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-3622 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WF-3622 Show ‘Service Required’?

Posjet servisu je često nepotrebno. Wic Reset Connect allows a safe Epson WF-3622 waste counter reset in minutes.

Kako se pogreška prikazuje

Pisač odbija ispisati čak i kad je tinte dovoljno.
Epson Status Monitor prikazuje upozorenje na održavanje
Treptajuća svjetla i blokirani poslovi
Uređaj je zaključan dok se ne izvrši resetiranje.

Step-by-Step: Epson WF-3622 Waste Counter Reset

Korak 1: Prepare a Windows PC + USB cable and connect Epson WF-3622 directly. Keep Internet enabled for validation.
Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson WF-3622 appears in the device list.
Korak 3: Use the key to reset the counter, wait for completion, then restart Epson WF-3622 to finalize.

Kupite ključ za resetiranje ⬇️ Preuzmite Wic Reset Connect Upute

Most Epson WF-3622 waste counter resets finish in ~1–2 minutes.

Prije nego što počnete

Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
Windows 7/8/10/11 PC
Stabilna internetska veza tijekom resetiranja
Valjani Wic resetni ključ za povezivanje

Često postavljana pitanja

Trebam li servisni centar?

Obično nije zbog zaključavanja brojača otpadne tinte; obično je dovoljan reset.

Što ako resetiranje ne uspije?

Provjerite USB kabel/priključak, pokrenite kao administrator i zatvorite ostale uslužne programe za pisač.

Koliko dugo traje?

Obično oko 1–2 minute.

Mogu li resetirati putem Wi-Fi-ja?

Ne. Za resetiranje je potrebna USB veza s računalom s operativnim sustavom Windows.

Guide prepared for Epson WF-3622 – Waste Ink Counter Reset using Wic Reset Connect.