Reset Epson WF-2531 Waste Ink Counter in Minutes

Epson WF-2531 Waste Ink Counter Reset

When the Epson WF-2531 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2531 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WF-2531 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson WF-2531 waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson WF-2531 Waste Counter Reset

  1. Stap 1: Connect Epson WF-2531 to a Windows computer with a stable Internet connection using a USB cable.
  2. Stap 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2531.
  3. Stap 3: Use the key to reset the counter, wait for completion, then restart Epson WF-2531 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructies

Most Epson WF-2531 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson WF-2531 – Waste Ink Counter Reset using Wic Reset Connect.

Winkelwagen