特定型号重置指南
Epson WF-2531 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson WF-2531 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
What the Epson WF-2531 service message means
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson WF-2531 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect 旨在重置兼容的计数器 Epson WF-2531. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson WF-2531
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for WF-2531 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson WF-2531 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-2531.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson WF-2531 is not detected
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- Install the original Epson driver for WF-2531; a generic Windows driver may not expose the required communication interface.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
Epson WF-2531 reset FAQ
Does Epson WF-2531 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
Can I reset Epson WF-2531 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.