Fix Epson L5298 Service Required – Waste Counter Reset

Epson L5298 Waste Ink Counter Reset

The Epson L5298 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L5298 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L5298 Ink Pad Counter Warning?

Most Epson L5298 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson L5298 Waste Counter Reset

  1. Stap 1: Use a Windows PC (7–11) with Internet access. Connect Epson L5298 via USB (Wi-Fi reset is not supported).
  2. Stap 2: Run Wic Reset Connect as Administrator and confirm Epson L5298 is detected.
  3. Stap 3: Use the key to reset the counter, wait for completion, then restart Epson L5298 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructies

Most Epson L5298 waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson L5298 – Waste Ink Counter Reset using Wic Reset Connect.

Winkelwagen