特定型号重置指南
Epson L5298 Reset Waste Ink Counter
When Epson L5298 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
The counter behind the Epson L5298 warning
An ink pad message is a maintenance safeguard. It indicates that Epson L5298 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect 旨在重置兼容的计数器 Epson L5298. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L5298
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for L5298 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L5298 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L5298.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L5298 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- Install the original Epson driver for L5298; a generic Windows driver may not expose the required communication interface.
Epson L5298 reset FAQ
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
Can I reset Epson L5298 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.