モデル別リセットガイド
Epson XP-440 Reset Waste Ink Counter
The service-required message on Epson XP-440 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Why the ink pad counter blocks Epson XP-440
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson XP-440 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connectは、互換性のあるカウンターをリセットするよう設計されています Epson XP-440. 物理的な廃インクシステムも、必要に応じて点検およびメンテナンスする必要があります。.
Reset the counter in Epson XP-440
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
公式ドライバーをインストールする
Install the official Epson driver for XP-440 and confirm that Windows can see the printer.
-
USBで直接接続する
Connect Epson XP-440 to the computer without Wi-Fi, a hub or an adapter.
-
Wic Reset Connect を起動する
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-440.
-
キーを入力してリセットする
購入したキーを入力し、「リセット」を選択して、完了するまでプリンターを接続したままにします。.
If Epson XP-440 is not detected
- プリンターをコンピューターに直接接続します。Wi-Fi、USBハブ、ドッキングステーション、プリントサーバーは使用しないでください。.
- 別のプログラムがUSB接続を保持している場合は、停止中の印刷ジョブをクリアし、プリンターとWindowsの両方を再起動します。.
- プリンターが検出されない場合は、別のUSBポートと、データ通信に対応していることが確認済みのUSBケーブルを試してください。.
- Wic Reset Connectを管理者として実行し、検証中はインターネット接続を維持します。.
Epson XP-440 reset FAQ
リセットにはどのくらい時間がかかりますか?
プリンターが正しく検出された後、リセット自体は通常約1~2分で完了します。.
Can I reset Epson XP-440 over Wi-Fi?
いいえ。Wic Reset Connectでは、Windowsコンピューターへの直接USB接続が必要です。.
最初のリセット試行に失敗した場合はどうすればよいですか?
まず、ドライバーまたはUSB通信の問題を解決してください。キーが使用済みになった場合は、新しいキーの生成機能を使用するか、サポートにお問い合わせください。.
