Epson PX-045A Ink Pad Counter Reset Guide

Epson PX-045A Waste Ink Counter Reset

The Epson PX-045A delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson PX-045A uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson PX-045A Stops Printing (Waste Counter Limit)

サービス訪問は不要な場合が多い。. Wic Reset Connect allows a safe Epson PX-045A waste counter reset in minutes.

一般的な症状

  • ‘ドライバまたはユーティリティの「サービスが必要です」/耐用年数メッセージ
  • メンテナンス/サポートコード(モデル/ドライバーによって異なる)
  • クリーニングサイクル後に印刷が停止する
  • プリンタを再起動しても警告が繰り返される

Three Steps to Restore Epson PX-045A Printing

  1. ステップ1: Use a Windows PC (7–11) with Internet access. Connect Epson PX-045A via USB (Wi-Fi reset is not supported).
  2. ステップ2: スタート Wic Reset Connect in Administrator mode and wait until Epson PX-045A appears in the device list.
  3. ステップ3: リセットキーを入力し リセット. Wait ~1–2 minutes, then restart Epson PX-045A.

Most Epson PX-045A waste counter resets finish in ~1–2 minutes.

システム要件

  • USB接続が必要(Wi-Fiリセットには非対応)
  • 有効なWicリセット コネクトリセットキー
  • リセット中の安定したインターネット接続
  • Windows 7/8/10/11 PC

よくある質問

サービスセンターは必要ですか?
通常、廃インクカウンターのロックには使用しない。.
リセットが効かない場合は?
USBケーブル/ポートを確認し、管理者として実行し、他のプリンタユーティリティを終了します。.
Wi-Fiでリセットできますか?
リセットはWindows PCへのUSB接続が必要です。.
所要時間は?
通常は1~2分程度。.

Guide prepared for Epson PX-045A – Waste Ink Counter Reset using Wic Reset Connect.

お買い物カゴ
通貨を選択する