Epson NX215 Waste Ink Counter Reset

When the Epson NX215 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson NX215 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson NX215 Stops Printing (Waste Counter Limit)

Most Epson NX215 waste ink counter locks are solved by a software counter reset. Wic Reset Connect は簡単な手順を提供する。.

Reset Epson NX215 Waste Ink Counter in 3 Steps

1. ステップ1： Use a Windows PC (7–11) with Internet access. Connect Epson NX215 via USB (Wi-Fi reset is not supported).
2. ステップ2： 走る Wic Reset Connect as Administrator and confirm Epson NX215 is detected.
3. ステップ3： リセットキーを入力し リセット. Wait ~1–2 minutes, then restart Epson NX215.

Most Epson NX215 waste counter resets finish in ~1–2 minutes.

システム要件

• Windows 7/8/10/11 PC
• USB接続が必要（Wi-Fiリセットには非対応）
• リセット中の安定したインターネット接続
• 有効なWicリセット コネクトリセットキー