Model-specific reset guide
Epson TX730WD Reset Waste Ink Counter
A waste ink counter warning can prevent Epson TX730WD from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
The counter behind the Epson TX730WD warning
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson TX730WD, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson TX730WD. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX730WD
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for TX730WD and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX730WD to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX730WD.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX730WD is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for TX730WD; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson TX730WD reset FAQ
Can I reset Epson TX730WD over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson TX730WD need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson TX730WD
Ready to restore Epson TX730WD? Check the requirements once more and start the guided reset.