Epson L3114 Waste Ink Counter Reset
The Epson L3114 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3114 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson L3114 Ink Pad Counter Warning?
Una visita di assistenza spesso non è necessaria. Wic Reset Connect allows a safe Epson L3114 waste counter reset in minutes.
Come appare l'errore
- La stampante si rifiuta di stampare anche se l'inchiostro è disponibile
- Il monitor di stato Epson mostra un avviso di manutenzione
- Spie lampeggianti e lavori bloccati
- Il dispositivo è bloccato finché non viene eseguito il reset
Reset Epson L3114 Waste Ink Counter in 3 Steps
- Fase 1: Connect Epson L3114 to a Windows computer with a stable Internet connection using a USB cable.
- Fase 2: Correre Wic Reset Connect as Administrator and confirm Epson L3114 is detected.
- Fase 3: Use the key to reset the counter, wait for completion, then restart Epson L3114 to finalize.
Most Epson L3114 waste counter resets finish in ~1–2 minutes.
Correzioni comuni
- Disattivare temporaneamente la VPN/proxy se la convalida fallisce.
- Chiudere Epson Status Monitor o altre utility della stampante.
- Eseguire l'applicazione come amministratore.
- Utilizzare una connessione USB diretta (evitare gli hub).
- Riavviare la stampante e il PC, quindi riprovare.
Domande frequenti
È possibile eseguire il reset tramite Wi-Fi?
No. Il reset richiede una connessione USB a un PC Windows.
E se il reset non funziona?
Controllare il cavo/la porta USB, eseguire come amministratore e chiudere le altre utility della stampante.
Quanto tempo ci vuole?
Di solito circa 1-2 minuti.
Ho bisogno di un centro di assistenza?
In genere non per il blocco del contatore dell'inchiostro di scarto; di solito è sufficiente un reset.
Guide prepared for Epson L3114 – Waste Ink Counter Reset using Wic Reset Connect.