Model-specific reset guide
Epson ET-M1128 Azzeramento del contatore di inchiostro esausto
Epson ET-M1128 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Understanding the Epson ET-M1128 waste ink warning
Epson ET-M1128 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-M1128. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-M1128
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for ET-M1128 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-M1128 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-M1128.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-M1128 is not detected
- Install the original Epson driver for ET-M1128; a generic Windows driver may not expose the required communication interface.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson ET-M1128 reset FAQ
Can I reset Epson ET-M1128 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson ET-M1128
Follow the verified sequence for Epson ET-M1128, then restart the printer and continue your work.