特定型号重置指南
Epson ET-M1128 Reset Waste Ink Counter
Epson ET-M1128 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Understanding the Epson ET-M1128 waste ink warning
Epson ET-M1128 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect 旨在重置兼容的计数器 Epson ET-M1128. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson ET-M1128
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for ET-M1128 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson ET-M1128 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-M1128.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson ET-M1128 is not detected
- Install the original Epson driver for ET-M1128; a generic Windows driver may not expose the required communication interface.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
Epson ET-M1128 reset FAQ
Can I reset Epson ET-M1128 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.