Epson BX300F Waste Ink Counter Reset
If your Epson BX300F suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson BX300F uses a software counter to estimate pad saturation and locks printing at a set threshold.
Understanding the Epson BX300F Waste Ink Counter
Una visita di assistenza spesso non è necessaria. Wic Reset Connect allows a safe Epson BX300F waste counter reset in minutes.
Sintomi comuni
- ‘Messaggio ’Service Required' / service life nel driver o nell'utility
- Codice di manutenzione/assistenza (varia a seconda del modello/driver)
- La stampa si interrompe dopo i cicli di pulizia
- L'avviso si ripete dopo il riavvio della stampante
Epson BX300F Ink Pad Counter Reset – Quick Steps
- Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson BX300F via USB (Wi-Fi reset is not supported).
- Fase 2: Correre Wic Reset Connect as Administrator and confirm Epson BX300F is detected.
- Fase 3: Inserire il tasto di reset e premere Reset. Wait ~1–2 minutes, then restart Epson BX300F.
Most Epson BX300F waste counter resets finish in ~1–2 minutes.
FAQ
E se il reset non funziona?
Controllare il cavo/la porta USB, eseguire come amministratore e chiudere le altre utility della stampante.
Quanto tempo ci vuole?
Di solito circa 1-2 minuti.
È possibile eseguire il reset tramite Wi-Fi?
No. Il reset richiede una connessione USB a un PC Windows.
Ho bisogno di un centro di assistenza?
In genere non per il blocco del contatore dell'inchiostro di scarto; di solito è sufficiente un reset.
Guide prepared for Epson BX300F – Waste Ink Counter Reset using Wic Reset Connect.