Epson BX300F Waste Ink Counter Reset

If your Epson BX300F suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson BX300F uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson BX300F Waste Ink Counter

通常不需要上门服务。. Wic Reset Connect allows a safe Epson BX300F waste counter reset in minutes.

常见症状

‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
维护/支持代码（因型号/驱动程序而异）
清洁循环后停止打印
重新启动打印机后，警告重复出现

Epson BX300F Ink Pad Counter Reset – Quick Steps

步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson BX300F via USB (Wi-Fi reset is not supported).
步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson BX300F is detected.
步骤 3： 输入重置密钥并按重置. Wait ~1–2 minutes, then restart Epson BX300F.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson BX300F waste counter resets finish in ~1–2 minutes.

常见问题

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

需要多长时间？

通常约 1-2 分钟。.

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

Guide prepared for Epson BX300F – Waste Ink Counter Reset using Wic Reset Connect.