Epson TX101 Waste Ink Counter Reset

The Epson TX101 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX101 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson TX101 Show ‘Service Required’?

Most Epson TX101 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Gejala Umum

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson TX101 Waste Ink Counter in 3 Steps

1. Langkah 1: Connect Epson TX101 to a Windows computer with a stable Internet connection using a USB cable.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson TX101 is detected.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson TX101.

Most Epson TX101 waste counter resets finish in ~1–2 minutes.

Sebelum Anda Mulai

• Koneksi Internet stabil selama pengaturan ulang
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Windows 7/8/10/11 PC

Jika Printer Tidak Terdeteksi

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Hidupkan ulang printer dan PC, kemudian coba lagi.

Pertanyaan yang Sering Diajukan