Epson M1128 Waste Ink Counter Reset

If your Epson M1128 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson M1128 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson M1128 Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson M1128 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Bagaimana Kesalahan Muncul

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson M1128 Waste Ink Counter in 3 Steps

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson M1128 directly. Keep Internet enabled for validation.
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson M1128 appears in the device list.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson M1128 to finalize.

Most Epson M1128 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Koneksi Internet stabil selama pengaturan ulang

Pemecahan masalah

• Jalankan aplikasi sebagai Administrator.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.