Epson M1120 Waste Ink Counter Reset
If your Epson M1120 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson M1120 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson M1120 Ink Pad Counter Warning?
Dengan Wic Reset Connect, you can reset the Epson M1120 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Gejala Umum
- Printer menolak untuk mencetak meskipun tinta tersedia
- Monitor Status Epson menunjukkan peringatan pemeliharaan
- Lampu berkedip dan pekerjaan terhalang
- Perangkat terkunci hingga pengaturan ulang dilakukan
Reset Epson M1120 Waste Ink Counter in 3 Steps
- Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson M1120 via USB (Wi-Fi reset is not supported).
- Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson M1120 is detected.
- Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson M1120.
Most Epson M1120 waste counter resets finish in ~1–2 minutes.
Sebelum Anda Mulai
- Windows 7/8/10/11 PC
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
- Koneksi Internet stabil selama pengaturan ulang
Jika Printer Tidak Terdeteksi
- Tutup Epson Status Monitor atau utilitas printer lainnya.
- Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
- Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
- Hidupkan ulang printer dan PC, kemudian coba lagi.
- Jalankan aplikasi sebagai Administrator.
Guide prepared for Epson M1120 – Waste Ink Counter Reset using Wic Reset Connect.