Epson M1120 Waste Ink Counter Reset

If your Epson M1120 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson M1120 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson M1120 Ink Pad Counter Warning?

与 Wic Reset Connect, you can reset the Epson M1120 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

常见症状

• 打印机即使有墨水也拒绝打印
• 爱普生状态监视器显示维护警告
• 闪烁的灯光和受阻的工作
• 设备被锁定，直到执行重置

Reset Epson M1120 Waste Ink Counter in 3 Steps

1. 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson M1120 via USB (Wi-Fi reset is not supported).
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson M1120 is detected.
3. 步骤 3： 输入重置密钥并按 重置. Wait ~1–2 minutes, then restart Epson M1120.

Most Epson M1120 waste counter resets finish in ~1–2 minutes.

开始之前

• Windows 7/8/10/11 电脑
• 需要 USB 连接（不支持 Wi-Fi 重置）
• 有效 Wic 复位连接复位键
• 重置期间稳定的互联网连接

如果检测不到打印机

• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 如果验证失败，则暂时禁用 VPN/代理。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 重新启动打印机和电脑，然后再试一次。.
• 以管理员身份运行应用程序。.