Epson L3261 Waste Ink Counter Reset

When the Epson L3261 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3261 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson L3261 Show ‘Service Required’?

Most Epson L3261 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Gejala Umum

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Step-by-Step: Epson L3261 Waste Counter Reset

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson L3261 directly. Keep Internet enabled for validation.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson L3261 is detected.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson L3261.

Most Epson L3261 waste counter resets finish in ~1–2 minutes.

Pemecahan masalah

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Jalankan aplikasi sebagai Administrator.