Epson L3260 Waste Ink Counter Reset

If your Epson L3260 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson L3260 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson L3260 Show ‘Service Required’?

Dengan Wic Reset Connect, you can reset the Epson L3260 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Tanda-tanda Khas

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Reset Epson L3260 Waste Ink Counter in 3 Steps

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson L3260 directly. Keep Internet enabled for validation.
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson L3260.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson L3260 to finalize.

Most Epson L3260 waste counter resets finish in ~1–2 minutes.

Pemecahan masalah

• Gunakan koneksi USB langsung (hindari hub).
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Jalankan aplikasi sebagai Administrator.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.

Pertanyaan yang Sering Diajukan