特定型号重置指南
Epson L3260 Reset Waste Ink Counter
Epson L3260 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Why Epson L3260 stops printing
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson L3260, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson L3260. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L3260
正确的准备工作可以避免在通信失败时使用重置密钥。选择“重置”前，请确认每项要求。.
-
安装原始驱动程序
Install the official Epson driver for L3260 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L3260 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3260.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L3260 is not detected
- Install the original Epson driver for L3260; a generic Windows driver may not expose the required communication interface.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
Epson L3260 reset FAQ
Can I reset Epson L3260 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
Does Epson L3260 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.