Epson L1118 Waste Ink Counter Reset

When the Epson L1118 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L1118 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L1118 Stops Printing (Waste Counter Limit)

Kunjungan servis sering kali tidak diperlukan. Wic Reset Connect allows a safe Epson L1118 waste counter reset in minutes.

Bagaimana Kesalahan Muncul

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Three Steps to Restore Epson L1118 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson L1118 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson L1118 is detected.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson L1118.

Most Epson L1118 waste counter resets finish in ~1–2 minutes.

Perbaikan Umum

• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Jalankan aplikasi sebagai Administrator.
• Gunakan koneksi USB langsung (hindari hub).