Epson CX4000 Waste Ink Counter Reset

When the Epson CX4000 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson CX4000 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson CX4000 Show ‘Service Required’?

Most Epson CX4000 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Tanda-tanda Khas

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson CX4000 Waste Ink Counter in 3 Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson CX4000 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson CX4000 is detected.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson CX4000 to finalize.

Most Epson CX4000 waste counter resets finish in ~1–2 minutes.

Apa yang Anda Butuhkan

• Koneksi Internet stabil selama pengaturan ulang
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC

Pemecahan masalah

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Gunakan koneksi USB langsung (hindari hub).

Pertanyaan yang Sering Diajukan