Epson CX4000 Waste Ink Counter Reset

When the Epson CX4000 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson CX4000 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson CX4000 Show ‘Service Required’?

Most Epson CX4000 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Tipični znakovi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Reset Epson CX4000 Waste Ink Counter in 3 Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson CX4000 via USB (Wi-Fi reset is not supported).
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson CX4000 is detected.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson CX4000 to finalize.

Most Epson CX4000 waste counter resets finish in ~1–2 minutes.

Što vam je potrebno

• Stabilna internetska veza tijekom resetiranja
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Valjani Wic resetni ključ za povezivanje
• Windows 7/8/10/11 PC

Otklanjanje poteškoća

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).

Često postavljana pitanja