Epson SX115 Waste Ink Counter Reset

The Epson SX115 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX115 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson SX115 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson SX115 waste counter reset in minutes.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Step-by-Step: Epson SX115 Waste Counter Reset

1. 1. lépés: Prepare a Windows PC + USB cable and connect Epson SX115 directly. Keep Internet enabled for validation.
2. 2. lépés: Run Wic Reset Connect as Administrator and confirm Epson SX115 is detected.
3. 3. lépés: Use the key to reset the counter, wait for completion, then restart Epson SX115 to finalize.

Most Epson SX115 waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key

If the Printer Is Not Detected

• Try another USB cable (some cables are charge-only).
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions