Model-specific reset guide
Epson Photo 1410 Hulladék tinta számláló visszaállítása
A waste ink counter warning can prevent Epson Photo 1410 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why the ink pad counter blocks Epson Photo 1410
Epson Photo 1410 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson Photo 1410. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson Photo 1410
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for Photo 1410 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson Photo 1410 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson Photo 1410.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson Photo 1410 is not detected
- Install the original Epson driver for Photo 1410; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson Photo 1410 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does Epson Photo 1410 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson Photo 1410
Ready to restore Epson Photo 1410? Check the requirements once more and start the guided reset.