Epson L3261 Waste Ink Counter Reset

When the Epson L3261 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3261 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson L3261 Show ‘Service Required’?

Most Epson L3261 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson L3261 Waste Counter Reset

1. 1. lépés: Prepare a Windows PC + USB cable and connect Epson L3261 directly. Keep Internet enabled for validation.
2. 2. lépés: Run Wic Reset Connect as Administrator and confirm Epson L3261 is detected.
3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson L3261.

Most Epson L3261 waste counter resets finish in ~1–2 minutes.

Troubleshooting

• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.