Fix Epson CX6000 Service Required – Waste Counter Reset

Epson CX6000 Waste Ink Counter Reset

The Epson CX6000 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson CX6000 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson CX6000 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson CX6000 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson CX6000 Ink Pad Counter Reset – Quick Steps

  1. 1. lépés: Connect Epson CX6000 to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. lépés: Open Wic Reset Connect with admin privileges and verify device recognition for Epson CX6000.
  3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson CX6000.
Buy Reset Key ⬇️ Download Wic Reset Connect Utasítás

Most Epson CX6000 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson CX6000 – Waste Ink Counter Reset using Wic Reset Connect.

Bevásárlókocsi