Epson XP-302 Waste Ink Counter Reset

When the Epson XP-302 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-302 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-302 Stops Printing (Waste Counter Limit)

S Wic Reset Connect, you can reset the Epson XP-302 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Step-by-Step: Epson XP-302 Waste Counter Reset

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-302 via USB (Wi-Fi reset is not supported).
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson XP-302 appears in the device list.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson XP-302 to finalize.

Most Epson XP-302 waste counter resets finish in ~1–2 minutes.

Prije nego što počnete

• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Stabilna internetska veza tijekom resetiranja
• Windows 7/8/10/11 PC
• Valjani Wic resetni ključ za povezivanje

Uobičajena rješenja

• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Pokrenite aplikaciju kao administrator.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.

Često postavljana pitanja