Epson XP-302 Waste Ink Counter Reset

When the Epson XP-302 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-302 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-302 Stops Printing (Waste Counter Limit)

Med Wic Reset Connect, you can reset the Epson XP-302 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Almindelige symptomer

• ‘Service påkrævet’/meddelelse om levetid i driver eller hjælpeprogram
• Vedligeholdelses-/supportkode (varierer efter model/driver)
• Udskrivning stopper efter rengøringscyklusser
• Advarslen gentages efter genstart af printeren

Step-by-Step: Epson XP-302 Waste Counter Reset

1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-302 via USB (Wi-Fi reset is not supported).
2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-302 appears in the device list.
3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson XP-302 to finalize.

Most Epson XP-302 waste counter resets finish in ~1–2 minutes.

Før du begynder

• USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)
• Stabil internetforbindelse under nulstilling
• Windows 7/8/10/11 PC
• Gyldig Wic-nulstilling Tilslut nulstillingsnøgle

Almindelige rettelser

• Brug en direkte USB-forbindelse (undgå hubs).
• Kør appen som administrator.
• Prøv et andet USB-kabel (nogle kabler er kun til opladning).
• Luk Epson Status Monitor eller andre printerværktøjer.
• Deaktiver midlertidigt VPN/proxy, hvis valideringen mislykkes.

OFTE STILLEDE SPØRGSMÅL