Vodič za resetiranje specifičan za model

Epson WF-3640 Reset Waste Ink Counter

The service-required message on Epson WF-3640 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.

Reset tipka$8,00
Trenutna dostava e-poštomTehnička podrška uključenaZamjenski ključ nakon neuspjelog resetiranja
Problem

Why the ink pad counter blocks Epson WF-3640

Waste ink produced by cleaning cycles is collected inside the printer. Epson WF-3640 tracks those cycles electronically and can stop printing when the calculated limit is reached.

Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson WF-3640. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.

Windows 7–11Računalo ili prijenosno računalo
Izravni USBBez Wi-Fi-ja ili USB koncentratora
InternetZa provjeru ključa
Reset tipkaZa ovaj postupak
Korak po korak

Reset the counter in Epson WF-3640

The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.

  1. Instalirajte izvorni upravljački program

    Install the official Epson driver for WF-3640 and confirm that Windows can see the printer.

  2. Povežite izravno putem USB-a

    Connect Epson WF-3640 to the computer without Wi-Fi, a hub or an adapter.

  3. Pokrenite Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-3640.

  4. Unesite ključ i resetirajte

    Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.

Ispravno dovršite: Do not disconnect the cable while the reset is running. Restart Epson WF-3640 only after Wic Reset Connect reports that the operation is complete.
If Epson WF-3640 is not detected
  • Install the original Epson driver for WF-3640; a generic Windows driver may not expose the required communication interface.
  • Obrišite pauzirane zadatke ispisa i ponovno pokrenite pisač i Windows ako neki drugi program zauzima USB vezu.
  • Pokrenite Wic Reset Connect kao administrator i tijekom cijele provjere održavajte aktivnu internetsku vezu.
  • Ako pisač nije prepoznat, pokušajte s drugim USB priključkom i provjerenim USB kabelom koji podržava prijenos podataka.

Otvori potpune upute

Česta pitanja

Epson WF-3640 reset FAQ

Does Epson WF-3640 need service mode?

Ne. Pisači Epson ne koriste sekvencu servisnog načina rada Canon. Povežite pisač uobičajeno putem USB-a.

Can I reset Epson WF-3640 over Wi-Fi?

Ne. Wic Reset Connect zahtijeva izravnu USB vezu s računalom sa sustavom Windows.

Čisti li se resetiranjem spremnik s tintom ili se on zamjenjuje?

Ne. Mijenja se pohranjena vrijednost brojača. Pregledajte, očistite ili zamijenite fizički sustav za otpadnu tintu kada to njegovo stanje zahtijeva.

Resetirajte s povjerenjem

Restore Epson WF-3640

Ready to restore Epson WF-3640? Check the requirements once more and start the guided reset.

Ključ za resetiranje: $8,00
Shopping Cart
Odaberite svoju valutu